Contents
A step by step guide on how to properly execute a kickflip on a tech deck.
Checkout this video:
httpv://youtu.be/https://www.youtube.com/shorts/3gicgnZZQkk
Introduction
So you want to learn how to do a kickflip on a Tech Deck? You’ve come to the right place! This guide will teach you everything you need to know about performing this popular skateboarding trick.
First, let’s start with the basics. A kickflip is a skateboarding trick where the skater kicks the tail of the board, causing it to flip in the air and land back on the ground. This trick can be done on any type of skateboard, but it is most commonly associated with street skateboarding.
There are two main ways to perform a kickflip: natural and switch. Natural means that you will be kicking the board with your dominant foot (the foot that you put forward when you start skating), and switch means that you will be kicking the board with your non-dominant foot. For most people, natural is easier because it feels more natural to kick with your dominant foot. However, switch kickflips look more impressive and are often more challenging, so if you’re feeling ambitious, go for it!
Now that you know the basics, let’s get into how to actually do a kickflip on a Tech Deck. First, find a raised surface that you can use as a ramp – an elevated piece of pavement, a set of stairs, or even just a raised doorstep will work. You’ll also need something flat and smooth to land on – think a driveway or sidewalk. Avoid landing on grass or dirt, as these surfaces can cause your deck to slide out from under you.
Once you’ve found your ramp and landing spot, place your Tech Deck at the top of the ramp with the nose pointing down. Then, position your front foot just behind the front trucks (the metal axles that connect the wheels to the deck), and your back foot in the center of the tail (the back end of the deck). Lean forward so that your weight is over the front truck, then use your back foot to powerfullykickthe tail oftheboard downwards; asyou dothis, jumpstraight up into them air at tho same time. The key here is timing -you wantto make surethatyou kicksimultaneouslywith jumping, otherwiseyou won’t get enough heightonyour flipandtheboardwill just smack intothe ground.
Asyourboardstarts flippingin frontoftheair,- tuckyourlegs up towardsyourchestso thatthey don’t gethitbytheboardwhenitis flippingoverhead. Whenyou see thatyourboardis abouttoland- bringslegsbackdownandstompdownonthemiddleoftheboardwith bothfeetas hardasyoucan-thiswill helpstickthelandingandkeepyourboardfromslidingoutfromunderyou. Ifeverythinggoesright,-you’lllandwith bothfeetontherampand ride awaylikea pro! Otherwise,-just keep practicinguntilyou getit!
The Basics of a Kickflip
A kickflip is a skateboarding trick where the skater kicks the board up while jumping in the air, making the board do a 360-degree rotation before being caught again by the skater’s feet. The kickflip is one of the most basic and essential skateboarding tricks, and once you learn it, you’ll be able to progress to more difficult tricks. In this article, we’ll show you how to do a kickflip on a Tech Deck.
What is a Kickflip?
A kickflip is a type of skateboarding trick where the skater flips the board using their feet. The kickflip is one of the most popular skating tricks and can be performed on any type of terrain, including ramps, street skating, and even vert skating.
There are two main ways to perform a kickflip. The first method is known as the frontside flip, which is when the skater flips the board using their right foot. The second method is called the backside flip, which is when the skater uses their left foot to flipping the board.
The kickflip was first invented by professional skateboarder Rodney Mullen in 1982. He is also credited with inventing several other popular skateboarding tricks, such as the ollie and 540° spin.
The Steps of a Kickflip
A kickflip is a type of skateboarding trick in which the skater kicks the board up while flipping it. The board rotates around the skater’s foot before he or she catches it and rides away.
There are several steps involved in performing a kickflip:
1. First, the skater approaches the lip of the ramp or other surface with enough speed to make the jump.
2. As they reach the lip, they use their back foot to kick the tail of the board up into the air.
3. As the board flips, the skater uses their front foot to catch it and balance on top.
4. Finally, they ride away cleanly without falling off or wobbling.
Tips for Landing a Kickflip
The key to landing a kickflip on a tech deck is getting the right pop and timing your flips correctly. You need to make sure you snap your wrists hard to get the right height and spin. Timing is crucial – you need to make sure you flick your deck at the right time to get a clean rotation. Practice makes perfect, so keep trying and you’ll land that kickflip in no time!
Practice, Practice, Practice
If you want to land a kickflip on a tech deck, you need to be willing to put in the time and effort to practice. There is no magic formula or secret tips that will guarantee success – it’s all about practice and learning from your mistakes.
One of the best ways to practice is to find a smooth, level surface to skate on. This could be a driveway, concrete path or even a smooth section of pavement. Once you have found a good spot, set up your tech deck and start skating.
As you skate, take note of how the board feels beneath your feet and how it responds to your movements. Pay attention to your body position and learn how to shift your weight from one foot to the other. These are all important elements that will help you land a kickflip on a tech deck.
Don’t get discouraged if you don’t land the trick first time – it takes most people weeks or even months of practice before they nail it. Just keep skating and eventually you will land that kickflip!
Get the right tech Deck
There are a few different types of Tech Decks on the market, but the most important thing is to make sure you get one that’s the right size for your hand. If you have small hands, look for a mini deck; if you have large hands, look for a regular deck. You can also find Tech Decks with different thicknesses, but the standard thickness is 7-ply.
Once you have your Tech Deck, it’s time to start practicing! The first step is to learn how to ollie. An ollie is a jump where you pop the deck off the ground and catch it back under your feet. To do an ollie, place your front foot in the center of the deck and your back foot on one of the bolts. Bend your knees and then pop the deck off the ground by jumping up. As you jump, slide your back foot forward so that it’s in the middle of the deck when you catch it.
Once you’ve mastered the ollie, you can start working on learning how to kickflip. A kickflip is a move where you flip the board 360 degrees while it’s in mid-air. To do a kickflip, start with your front foot in the middle of the board and your back foot on one of the bolts. Bend your knees and then jump up while scooping your back foot forward and flicking your front wrist outward. The goal is to get the board to flip 360 degrees before catching it back under your feet. Practice this move slowly at first until you get the hang of it and then try doing it faster.
Use the Right Shoes
One of the most important things when learning how to kickflip on a tech deck is to use the right shoes. You want to choose shoes that have good grip and support. This will help you stay on your board and perform tricks more easily. You also want to make sure that your shoelaces are tied tightly so they don’t get caught on the deck while you’re flipping.
Conclusion
So there you have it! With a little bit of practice, you’ll be kickflipping like a pro in no time. Remember to start slow and gradually increase the speed and height of your flips as you get more comfortable. And most importantly, have fun!
