Contents
Learn how to do tech deck like a pro by following these simple tips and tricks.
Checkout this video:
The Basics of Tech Decking
If you’re looking to get into tech decking, the first thing you need to do is get yourself a good quality deck. This is the most important piece of equipment you will need. Once you have a deck, you can start practicing the basics. Tech decking is all about doing tricks with your deck. The most basic trick is the ollie.
What is a Tech Deck?
A Tech Deck is a miniature skateboard that is perfect for doing tricks with your fingers. Tech Decks are made by the same companies that make regular skateboards, so they are very high quality. The trucks and wheels on a Tech Deck are just like the ones on a regular skateboard, but the deck itself is much smaller.
Tech Decks come in a variety of different styles, from street to vert. There are also different brands of Tech Decks, each with their own unique graphics and style. Some brands of Tech Decks even come with special accessories, like led light-up wheels!
If you want to learn how to do tricks with a Tech Deck, there are plenty of online tutorials and videos that can teach you the basics. Once you have mastered the basics, you can start practicing more advanced tricks. There are endless possibilities when it comes to fingerboarding, so get out there and start exploring!
The Different Parts of a Tech Deck
A Tech Deck is a miniature skateboard that you can use to perform tricks. They are usually about the same size as a real skateboard, but sometimes they are slightly larger or smaller. Tech Decks usually have a small “nose” and “tail” (the front and back of the deck), and they also have four wheels.
Just like regular skateboards, Tech Decks come in different shapes and sizes. The most common shapes are “popsicle” shaped (also called “deck-style”), which look like regular skateboards, and “Old School” shaped, which have a distinctly different nose and tail. Tech Decks also come in different widths, which is measured in inches. The most common widths are 6″, 7″, and 8″.
In addition to the deck itself, you will also need a set of trucks (the metal parts that attach to the wheels), a set of wheels, and some bearings (the small metal pieces that go inside the wheels). You may also want to get some grip tape (the sticky stuff that you put on the top of the deck), although this is not required.
The different types of Tech Decks
There are several different types of tech decks available on the market today. The most popular and well-known type is the street tech deck. These decks are designed for use on concrete and asphalt surfaces and are made to resist wear and tear. Street tech decks usually have a concave shape to help with grinds and tricks.
The other type of tech deck is the freestyle tech deck. These decks are designed for use on smooth surfaces like those found in skateparks. Freestyle tech decks are often wider than street decks and have a more pronounced concave shape. This makes them ideal for performing big air tricks.
Getting Started with Tech Decking
Tech Decking is a great way to show off your skating skills. It is a lot of fun and can be a great way to impress your friends. But how do you get started? In this article, we will show you how to get started with tech decking. We will also provide some tips on how to tech deck like a pro.
Choose the right tech Deck
One of the most important aspects of tech decking is choosing the right tech deck for you. You want to make sure that you get a deck that is the right size for your hands and that has the right amount of grip. Some people prefer to have a lot of grip on their tech decks while others prefer to have less. You also want to make sure that you get a deck that is durable and will not break easily.
Choose the Right Wheels
While most trucks will come equipped with wheels, they may not necessarily be the right size or hardness for your skating style. You can find Tech Deck wheels in a variety of colors, sizes, and hardnesses, so it’s important to choose the right ones for your needs.
If you’re just starting out, it’s a good idea to go with softer wheels that are easier to control. As you get more experienced, you can move up to harder wheels that will allow you to go faster and do more tricks.
Most Tech Deck trucks have 54mm wheels, but you can also find trucks with 52mm or 56mm wheels. The smaller the number, the smaller the wheel. You may want to experiment with different sizes to see what works best for you.
When choosing wheel hardness, it’s important to keep in mind that harder wheels will be faster and easier to do tricks on, but they may be more difficult to control. Softer wheels will be slower and harder to do tricks on but will be much easier to control.
Choose the Right Bearings
There are two main types of skateboard bearings: ceramic and steel. Ceramic bearings are made of, you guessed it, a ceramic material. They’re harder, lighter, and faster than steel bearings. Steel bearings are made of, well, steel. They aren’t as fast as ceramic bearings but they’re cheaper and more durable. When choosing between the two, it really comes down to personal preference and what you want to use your skateboard for. If you’re just getting started, we recommend going with steel bearings. They’re easier to maintain and will last longer if you take care of them properly.
Tech Decking Tricks
Anyone can tech deck, but it takes practice to do it like a pro. The key is to find a good spot, and then use your fingers to slide the deck across the ground. You can also do tricks by using your fingers to flip the deck in the air. If you want to get really good at tech decking, you should practice every day.
Ollie
One of the most basic and essential skateboard tricks, the Ollie is a great move to start learning if you’re new to skateboarding. It involves popping the board into the air with your feet and then catching it again as it comes down. The key to doing this trick is to get the timing right so that you don’t end up flat on your face! Here are some tips for nailing an Ollie:
-Get in position: You’ll need to be in an athletic stance with your feet placed shoulder-width apart and your weight evenly distributed on both legs.
-Bend your knees: This will help you generate the upward force needed to pop the board into the air.
-Jump: Use your legs to jump straight up into the air, using your arms for balance if needed. As you jump, tuck your feet underneath the board so that it rises up with you.
-Catch the board: As the board starts to come down, catch it with your feet and gently land back on the ground in an athletic stance.
Kickflip
A Kickflip is a street skateboarding trick where the skateboarder flips their board 360 degrees using their front foot to tap the nose of the board on the ground, in mid-air.
To do a Kickflip, you need to be able to ollie (jump) high enough to get the front wheels off the ground. The higher you can ollie, the easier the kickflip will be.
1) Place your front foot near the center of the deck and your back foot near the tail.
2) Bend your knees and squat down low to prepare for the jump.
3) Push down with your back foot to pop the tail of the board up into the air. As you do this, quickly flick your front foot off the nose of the board.
4) The board will spin in mid-air and should land back underneath your feet. Ride away cleanly and you’ve landed a kickflip!
Heelflip
flattened Kickflip where you land on your heel
To do a heelflip, place your front foot near the center of the board and your back foot hanging off the tail. Put your weight on your front foot and use your back foot to flick the tail up and over. As the board flips, scoop it up with your front foot and catch it on your heel.
Advanced Tech Decking
Tech Decking is a skill that can be mastered with practice. Some people are naturals at it, while others have to work a little harder. Either way, with the right tips and tricks, anyone can become a tech decking pro. In this article, we’ll share some advanced tips and tricks for tech decking like a pro.
Combining Tricks
Before you combine two tricks, you need to make sure that the tricks complement each other. This means that the tricks should be similar in terms of their difficulty, their style, and the amount of space that they require. Once you have found two compatible tricks, you can start thinking about how to link them together.
One way to combine tricks is to use your deck as a prop. For example, if you are planning to link a pop shove-it with an ollie, you can place your front foot on the nose of the deck and use the deck to help “shove” your ollie into the air. Another way to link tricks is to use your body as a prop. For example, if you want to link a kickflip with an ollie, you can use your front foot to help “kick” the board into the air.
Once you have linked two tricks together, you can string together multiple combinations by chaining them together. For example, if you have linked a pop shove-it with an ollie, you can then link the ollie with another trick, such as a kickflip or a sentence.
Street Tech Decking
Street tech decking is a style of skateboarding that focuses on tricks and skills that can be performed on a variety of surfaces, including stairs, rails, and ledges. If you want to become a street tech decker, you need to learn how to do a variety of tricks, including ollies, 180s, kickflips, and grinds. You should also learn how to ride in both regular and switch stance.
To start street tech decking, you will need a board that is made for street skating. You can find these boards at most skate shops or online retailers. They are typically made from seven-ply maple wood and have tail and nose kicks, along with concave or flat decks. The trucks are usually medium-sized (5.0-7.75), and the wheels are 50-60mm in size.
Once you have your board, practice your tricks in a safe area away from traffic. Start with basic tricks like ollies and 180s before moving on to more difficult ones like kickflips and grinds. When you are comfortable with your skills, find a good spot to skate – look for smooth concrete surfaces with ledges, rails, or stairs that you can use for your tricks.
Be sure to skate safely and always wear protective gear when street tech decking.
Tech Decking Tips
First, you need to find a good, flat surface. Second, you need to place your Tech Deck on the ground. Third, you need to grip the Tech Deck with your thumb and first two fingers. Fourth, you need to place your other hand on the back of the Tech Deck. Fifth, you need to push the Tech Deck down with your fingers while keeping your thumb on the top of the Tech Deck.
Practice
If you want to get better at tech decking, the most important thing you can do is practice. The more you skate, the better you’ll become at controlling your board. As with any sport, skating requires muscle memory and hand-eye coordination. The only way to develop these skills is to get out there and try again and again.
One way to practice is to set up an obstacle course in your driveway or backyard. You can use whatever you have on hand, such as milk crates, tires, or hula hoops.r Try skating through the course as fast as you can while maintaining control of your board. As you get better, add more difficult elements to the course, such as 540s or consistent grab tricks.
In addition to practicing at home, it’s important to skate with other people as often as possible. Not only is this more fun, but it also allows you to learn from others and challenge yourself to keep up. Skate parks are a great place to meet other tech deckers and work on your skills. If there isn’t a park nearby, see if any of your friends are interested in starting their own mini park in someone’s backyard.
Be Creative
As you become more familiar with tech decking, you will develop your own style. Be creative and experiment with new tricks. You can even make up your own tricks. Once you have mastered the basics, the sky is the limit.
One way to be creative is to combine two or more tricks. For example, you can do a pop-shuvit followed by a kickflip. Or you can do a pop-shuvit followed by a 360-degree spin. The possibilities are endless.
Another way to be creative is to use different parts of the tech deck. For example, you can use the nose or tail of the tech deck to do a trick. You can also use the sides of the tech deck to do a trick.
Finally, you can be creative with yourGrab techniquess and grabs. There are endless Grab possibilities, so experiment and find what works best for you.
