Contents
You can use Super Tech AC Recharge to keep your AC running smoothly and efficiently all summer long. Follow these simple instructions and you’ll be sure to stay cool and comfortable all season!
Checkout this video:
Introduction
Super Tech AC Recharge is a do-it-yourself air conditioner recharge and repair kit. The kit includes everything you need to recharge your air conditioner and stop leaks in the system. Super Tech AC Recharge is compatible with all makes and models of air conditioners, so it’s a great choice for anyone looking to repair their own air conditioner.
The kit includes a can of Super Tech Freon, a can of Super Tech Leak Sealer, a pressure gauge, and an instruction booklet. The Freon will recharge your air conditioner, and the Leak Sealer will stop any leaks in the system. The pressure gauge is used to check the pressure in the system, and the instruction booklet will provide step-by-step instructions on how to use the kit.
Using the Super Tech AC Recharge kit is simple and straightforward. Just follow the instructions in the booklet, and you’ll have your air conditioner up and running in no time.
What is Super Tech AC Recharge?
Super Tech AC Recharge is a product that is used to recharge air conditioners. It is a simple process that takes only a few minutes to complete. You will need to purchase the Super Tech AC Recharge kit, which includes the recharge can, hoses, and coupling agent. Follow the instructions below to properly recharge your air conditioner.
Attach the can of Super Tech AC Recharge to the low-pressure port on your air conditioner. The location of this port will vary depending on your air conditioner model, so consult your owner’s manual if you are unsure of its whereabouts.
Once the can is attached, open the valve and allow the coolant to flow into your air conditioner until it is full. You may hear gurgling noises as the coolant flows into the system; this is normal. Close the valve when the coolant level reaches the “full” line on the side of the can.
Detach the can of Super Tech AC Recharge from the low-pressure port and store it in a safe place. Do not open or puncture the can, as this could cause serious injury.
How to Use Super Tech AC Recharge
-Super Tech AC Recharge is available at most auto parts stores.
-Before using, be sure that the area around the vehicle is well ventilated.
-Shake can well and connect charging hose to low-pressure service port.
-Start engine and turn air conditioner to maximum cooling.
-With engine idling, slowly depress can trigger to release refrigerant.
-Continue charging until system pressure is equal to atmospheric pressure.
-Disconnect hose from charge fitting and turn off engine.
Super Tech AC Recharge Troubleshooting
If your Super Tech AC Recharge unit is not working properly, please check the following:
-Make sure the unit is properly plugged into an outlet.
-Check to see if there is power to the outlet by plugging in another appliance.
-Make sure the red power switch on the back of the unit is turned on.
-If the display still does not come on, reset the circuit breaker.
Conclusion
We hope this guide has been helpful in teaching you how to use Super Tech AC Recharge. If you have any further questions, please consult the product manual or contact customer support.
